Tumble Dryer – Instructions
Using the Tumble Dryer
- Open the door and load the drum with laundry. Ensure that garments do not hinder closure of the door.
- Gently close the door pushing it slowly until you hear the door 'click' shut.
- Select the desired drying programme by turning the programme knob.
- Press the programme start button. The dryer will start automatically.
- If the door is opened during the programme to check the laundry, it is necessary to press programme start to recommence drying after the door has been closed.
- When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down.
- Following the completion of the cycle the drum will rotate intermittently to minimize creasing. This will continue until the machine is switched OFF or the door is opened.
Do not open the door during the automatic programmes in order to obtain a proper drying.
WARNING: Remove Lint (Fluff) as this is a Fire Hazard
- The lint that collects in the tumble dryer is a fire hazard and MUST be emptied after each drying cycle.
- Always check before using the dryer that the lint has been removed.
Emptying the Water Condensation Tank
- The water condensation tank is found inside the door of the tumble dryer and must be emptied after every drying cycle, or your washing will not dry.
- Gently pull out the water container holding the handle (A). When it is full the water container will weigh about 6 kg.
- Tilt the water container to empty the water out through the spout (B). When empty, replace the water container back as shown; (C) first insert the base of the container into position as shown (1) then gentle push the top into position (2).
- Press the programme start button to restart the cycle.